Consumer Unit Replacement: What Every UK Homeowner Needs to Know

Inside a new consumer unit showing neatly terminated circuits

A consumer unit replacement usually costs £500 to £1,200 and takes around a day. If your fuse board is over 25 years old, has rewirable fuses or has no RCD protection, it's worth having it looked at. Modern boards with RCBOs protect each circuit individually, so a fault on one doesn't knock out the rest of the house.

Looking to book? See our consumer unit replacement in Barnsley.

Consumer unit replacement is one of the most important electrical upgrades a UK homeowner can make. If your fuse board is more than 25 years old, or still uses old rewirable fuses, it may no longer give you the protection a modern home needs. Harrison Bell explains what you need to know before booking a replacement.

What Is a Consumer Unit?

A consumer unit, also called a fuse box or fuse board, is the central hub that controls and distributes electricity around your home. It houses the main switch, circuit breakers and residual current devices that protect your circuits from overloads, short circuits and electric shock.

Modern consumer units use RCBOs, which protect each circuit individually. That's far better than older designs, where one RCD protected several circuits and a single trip could take out all your lights or sockets at once.

Signs You Need a Replacement

  • Your board still has old rewirable fuses
  • There is no RCD protection
  • The unit is more than 25 years old
  • Circuits trip often for no obvious reason
  • You can hear buzzing, or smell burning, from the unit
  • The unit has been damaged by water or a fault
  • You are having new electrical work done, such as a new kitchen or an extension

Is Your Fuse Box Out of Date?

A modern board is one of the best safety upgrades you can make. Call Harrison on 07931 845340 for a free quote.

Call for a Free Quote

What Does the Replacement Involve?

We isolate the supply, remove the old unit and fit a new 18th Edition RCBO board with surge protection. We check the earth bonding and upgrade it where needed, because a good board still relies on sound earthing. Everything is then tested, you receive your certificate and building control is notified. Most replacements are finished in a day, and your old fuse box is disposed of safely.

How Much Does It Cost?

Most consumer unit replacements with H Bell Electrical cost between £500 and £1,200, including testing, certification and disposal of the old unit. The price depends on the type of unit needed and the condition of your existing installation. You will get a clear quote before any work starts, and any extras are agreed with you first.

UK Regulations and What They Mean for You

Electrical work must meet BS 7671, the IET Wiring Regulations. The main points for a consumer unit replacement are:

  • Consumer units in homes must have a non-combustible enclosure
  • Socket circuits up to 32A must have 30mA RCD protection
  • Lighting circuits in homes must also have RCD protection
  • Arc fault detection devices are recommended in some situations, and we can advise on what suits your home

Do I Need a Full Rewire Too?

Not always. A consumer unit replacement and a full rewire are two different jobs, though they are sometimes recommended together. You may need a rewire if your wiring is more than 30 to 40 years old, especially if it is rubber-insulated, if an EICR shows it has deteriorated, or if sockets and switches feel warm or have scorch marks. In many newer homes with PVC-insulated copper wiring, only the board needs replacing. We will never recommend a more expensive job than you need.

Frequently Asked Questions

How long does a consumer unit replacement take?

Most take between 4 and 8 hours, depending on the size of the property and the number of circuits. We will give you a realistic timescale before we start.

Will I need to be at home during the work?

Yes, we ask that an adult be at the property during the installation, as your electricity will be off for the duration.

Do I need to notify my energy supplier?

Not for a consumer unit replacement. Where the work is notifiable, building control is notified as part of the job.

What is the difference between an RCD and an RCBO?

An RCD protects a group of circuits, so if it trips, several circuits go off. An RCBO protects a single circuit, so a fault on one doesn't affect the rest of your home. We fit RCBO boards as standard.

Can I upgrade my consumer unit at the same time as other electrical work?

Yes. Many customers combine a new board with extra sockets or lighting upgrades. Doing the work together is often better value and means fewer power cuts.

Time to Replace Your Fuse Box?

Get a free quote from Harrison, who covers Barnsley, Sheffield, Rotherham and Wakefield.

Get a Free Quote